Installing a bathroom cabinet is a fairly easy task

Medicine cabinets were in the beginning produced to be well-organized holding places for medicines, lotions, and perfumes. Nobody can be reasonably positive at what time they were relocated to the bathroom, however for some reason that room was selected to store lots of numerous elements employed in daily living. Medicine cabinets used to be simple in style and function and it is not until modern times that anyone gave any real thought to how they looked.

Medicine cabinets now come in a wide variety of types, sizes and finishes, so matching the decor of the bathroom is easy. You can get medicine cabinets in square and rectangular sizes, flush or surface mounted and in both wood finishes and metal finishes. You could even modify the position of the medicine cabinet. Gone are the days when they had to be located over the bathroom sink.

When looking for a new medicine cabinet you could go to almost any home supply store, hardware store or large retail store and discover many types of medicine cabinets. But, if you want the top choices and prices you must think about doing a little investigation on the net ahead of buying the cabinet. There are many reputable online sellers offering every style of medicine cabinet imaginable plus they usually charge less, in view of the fact that overhead is typically lower with Internet suppliers.

There are two methods to mount virtually any cabinet: flush or recessed mounting and surface mounting. Flush mounting should be left to a person who has done it before because it includes cutting the wall open and possibly having to cut one or two 2x4s in case the cabinet is wider than 16 inches. Surface mounted medicine cabinets are installed very simply by either fastening them straight to the 2x4s or putting in a few brackets and hanging them like hanging a picture on the wall. When installing the medicine cabinet it is important to keep in mind that it could be somewhat heavy, so you will want to make sure it is securely fastened to the wall studs. When this is the situation, it will require you to utilize heavy duty brackets, which ordinarily come with the cabinet.

The first step is to locate the 2x4s where you should be securing the cabinet. If you have a stud finder (obtainable in nearly all hardware store tool sections) locate the center of the two studs the cabinet should cover and mark the wall. If you don’t have a stud finder, get a small finishing nail and employ trial and error to find the 2x4s. Tap mildly with your finger on the wall in a horizontal direction until you hear the sound go lower, then gently drive the nail in a minimum of 3/4 in. to tell if you found wood or air. If you found wood, drive the nail in two additional times, 1/2 in. to the left and right of the initial hole. By using this method you can estimate where the center of the 2×4 is. It is not vital that you find the center exactly, however you will want the screws to have a lasting “bite.” If for any reason you can’t locate the 2x4s you will need to utilize hollow wall anchors; the screw-in types are the best to work with and are extremely sturdy. After that don’t be bothered about all those little holes you made; the cabinet should conceal them. Find more about bathroom medicine cabinets.

The next step is to line up the cabinet with the 2x4s. Position your cabinet with the top just below the center marks or the holes and make sure it is in the horizontal position you desire. Do not be concerned about leveling it yet. Mark the top of the cabinet, then set it on the counter and draw two perpendicular lines from the marks on the top of the cabinet to the base. Drill the required holes on these two lines. Four holes ought to be enough, however if your cabinet is very heavy, drill six or even eight holes. Author’s note: when it comes to hanging stuff on the wall, I firmly believe in overkill.

Once the holes are drilled in your cabinet, place it on the wall exactly where you want it, level it, examine the position again, double check your level, and then mark the holes on the wall. Put the cabinet down, and using a drill bit which is about half the thickness of the screw, drill pilot holes in the wall where you marked them and next thoroughly screw the hardware in, and then back them out. Be certain the holes are completely prepared ahead of putting in the cabinet. The basis for doing it this way is to make holding the cabinet and fastening it in much quicker, in addition to being more accurate. Keep the cabinet in place, fasten it, make sure all screws are firm, tidy up the mess, and put the tools away. Next, put stuff in the cabinet and you’re finished. Find more about bathroom wall tiles and vanity stools.

Recent Entries

• Several Property Investment Recommendations To Be Aware Of
• How to Start Off a Home Staging Company
• The Best Way to Get Forward Financially by Investing to Actual Estates
• Top Real Estate Investment Techniques For 2012
• The Most Effective Strategy To Move Musical Instruments
• Beneficial Suggestions When Purchasing Real Estate
• Strong Log Cabins Residential Start With Solid Bases
• Ideas To Make A Move to Arizona Stress Free
• How Can I Select The Most Effective Best OKC Roofing Contractor?
• How Do You Start to Remodel

This entry was posted on Tuesday, August 31st, 2010 at 12:50 am and is filed under Real Estate Investments. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.